GNER

Graphite Cutting Series

End Mills

  • MG
  • 0.6
  • 螺旋角30方
  • 縮頸3
  • R
  • 2FW
  • 鍍層Diamond
Features:  
    1. Special Diamond "CVD coating" is extremely wear-resistant and has a long tool life.
    2. The"micro diameter & long neck" corner radius endmill design is specially used for milling of graphite and composite materials..
Working Materials Hardness Level:   Good at graphite and composite materials. E.g. Graphite,CFRP,GFRP etc.
Applicable Milling Methods:  Finishing ,Semi-finishing 
Applicable Coolant Ways:   Dry Machining 
 
Type No. Diameter Neck Dia. Corner R Flute Length Effective Length O.A.L. Shank Dia.
D1 D3 R L1 L2 L3 D2
GNER100602 1.0 0.95 0.2 1.5 6 50 4
GNER100802 1.0 0.95 0.2 1.5 8 50 4
GNER101002 1.0 0.95 0.2 1.5 10 50 4
GNER101202 1.0 0.95 0.2 1.5 12 50 4
GNER150802 1.5 1.44 0.2 2 8 50 4
GNER151002 1.5 1.44 0.2 2 10 50 4
GNER151202 1.5 1.44 0.2 2 12 50 4
GNER151602 1.5 1.44 0.2 2 16 50 4
GNER200802 2.0 1.92 0.2 3 8 50 4
GNER201002 2.0 1.92 0.2 3 10 50 4
GNER201202 2.0 1.92 0.2 3 12 50 4
GNER201602 2.0 1.92 0.2 3 16 50 4
GNER202002 2.0 1.92 0.2 3 20 50 4
GNER251002 2.5 2.40 0.2 3 10 50 4
GNER251202 2.5 2.40 0.2 3 12 50 4
GNER251602 2.5 2.40 0.2 3 16 50 4
GNER252002 2.5 2.40 0.2 3 20 50 4
GNER301002 3.0 2.90 0.2 4 10 50 6
GNER301202 3.0 2.90 0.2 4 12 50 6
GNER301602 3.0 2.90 0.2 4 16 50 6
GNER302002 3.0 2.90 0.2 4 20 60 6
GNER302502 3.0 2.90 0.2 4 25 60 6
GNER303002 3.0 2.90 0.2 4 30 75 6
TOP