| Features: |
|
1. Special unequal spacing of the end teeth and variable helix designs not only improve its vibration resistance but extend the tool life.
|
|
2. It is dedicated to high speed trochoidal side milling; it has high vibration resistance level and high efficiency (Vc value>200 m/min).
|
| 3. Special geometric design is for plunge milling general steels except difficult-to-cut materials. |
| 4. It has outstanding chip removal performance. |
| Working Materials Hardness Level: General steels smaller than HRc48 |
Applicable Milling Methods:  Finishing, Semi-Finishing, and Roughing |
Applicable Coolant Ways: MQL (Mist) and Dry Machining  Emulsion Maching and Oil Machining |
| Type No. | Diameter | Flute Length | O.A.L. | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| XEV0304 | 3.0 | 8 | 50 | 6 |
| XEV0404 | 4.0 | 11 | 50 | 6 |
| XEV0504 | 5.0 | 13 | 50 | 6 |
| XEV0604 | 6.0 | 15 | 50 | 6 |
| XEV0804 | 8.0 | 20 | 60 | 8 |
| XEV1004 | 10.0 | 22 | 75 | 10 |
| XEV1204 | 12.0 | 26 | 75 | 12 |
| XEV1604 | 16.0 | 36 | 100 | 16 |
| XEV2004 | 20.0 | 40 | 100 | 20 |