UEYR

HSC & HHC Series Endmill

End Mills

  • MG-super
  • 0.2
  • 螺旋角35方
  • 縮頸3
  • R
  • 4F 00
  • HRc65
  • 鍍層G15
Features:  
    1. Special geometry short flutes design, is suitable for surface and slot milling of high-hardness material.
    2. The design is not suitable for side milling.
Working Materials Hardness Level:   Good at steels with hardness up to HRc32~65. E.g. NAK80, P20, SKD61(HRc52), SKD11(HRc62) etc.
Applicable Milling Methods:  Roughing  Semi-finishing  Finishing 
Applicable Coolant Ways:  MQL (Mist) Machining  Dry Machining   Emulsion Machining ,Oil Machining
 
Type No. Diameter Nick Dia. Corner R Flute Length Effective Length O.A.L. Shank Dia.
D1 D3 R L1 L2 L3 D2
UEYR0202 2.0 1.92 0.2 2.0 6 50 6
UEYR0205 2.0 1.92 0.5 2.0 6 50 6
UEYR0252 2.5 2.40 0.2 2.5 8 50 6
UEYR0255 2.5 2.40 0.5 2.5 8 50 6
UEYR0302 3.0 2.90 0.2 3.0 8 50 6
UEYR0305 3.0 2.90 0.5 3.0 8 50 6
UEYR0402 4.0 3.90 0.2 4.0 11 50 6
UEYR0403 4.0 3.90 0.3 4.0 11 50 6
UEYR0405 4.0 3.90 0.5 4.0 11 50 6
UEYR0602 6.0 5.80 0.2 6.0 16 50 6
UEYR0603 6.0 5.80 0.3 6.0 16 50 6
UEYR0605 6.0 5.80 0.5 6.0 16 50 6
UEYR0610 6.0 5.80 1.0 6.0 16 50 6
UEYR0615 6.0 5.80 1.5 6.0 16 50 6
UEYR0803 8.0 7.70 0.3 8.0 20 60 8
UEYR0805 8.0 7.70 0.5 8.0 20 60 8
UEYR0810 8.0 7.70 1.0 8.0 20 60 8
UEYR0820 8.0 7.70 2.0 8.0 20 60 8
UEYR1003 10.0 9.60 0.3 10.0 25 75 10
UEYR1005 10.0 9.60 0.5 10.0 25 75 10
UEYR1010 10.0 9.60 1.0 10.0 25 75 10
UEYR1020 10.0 9.60 2.0 10.0 25 75 10
TOP