| Feature : |
|
1. Global's pioneer end mill with two wavy edges + two flat edges staggered design. Chip breaking is neat,
and excellent performance in rough side milling. |
|
2. The sharp wavy edge is used for rough side milling; and the flat edge is used for finishing side milling.
It is a perfect dual-purpose tool design for both roughing and finishing. |
| 3. Special unequal flute spacing design and 2D/3D edge length design. Good tool rigidity, better vibration resistance and good tool life during processing. |
| 4. 1D high efficiency slot milling, and for side milling. Better vibration resistance and stability. |
| 5. XEW (A) Vc can reach 200(m/min) and above. |
| Working Materials Hardness Level : Applicable for under HRC45 difficult-to-cut material and general steels. E.g. Stainless steel, Titanium alloy and alloy steel. |
Applicable Milling Methods :  Finishing  Semi-finishing and Roughing |
Applicable Coolant Ways: Oil and MQL (Mist) Machining Emulsion Machining  Dry Machining |
| Type No. | Diameter | Chamfer | Flute Length | O.A.L | Shank Dia. |
|---|---|---|---|---|---|
| D1 | C | L1 | L3 | D2 |
|
| XEW0604A | 6 | 0.12 | 12 | 50 | 6 |
| XEW0604AL | 6 | 0.12 | 18 | 60 | 6 |
| XEW0804A | 8 | 0.16 | 16 | 60 | 8 |
| XEW0804AL | 8 | 0.16 | 24 | 75 | 8 |
| XEW1004A | 10 | 0.2 | 20 | 75 | 10 |
| XEW1004AL | 10 | 0.2 | 30 | 80 | 10 |
| XEW1204A | 12 | 0.24 | 24 | 75 | 12 |
| XEW1204AL | 12 | 0.24 | 36 | 100 | 12 |
