LRTD

Standard Series

End mills

  • MG
  • 0.6
  • 螺旋角35方
  • R
  • 4F-1
  • HRc55
  • 鍍層G10
ADD INQUIRY
Features:  
    1. <Extended shank> Standard 4 flutes corner radius endmill with low helix angle design. Good at milling for general steels hardness up to HRc45.
    2. Corner radius endmill of corner R , minimum design is 0.2mm.
Working Materials Hardness Level:   Good at steel material (HRc 18~45). E.g. S45C, P20 ,NAK80,SUS304 etc.
Applicable Milling Methods:  Finishing ,Semi-finishing and Roughing 
Applicable Coolant Ways:  Emulsion Machining , Oil  Machining       MQL (Mist)  Machining , Dry Machining
 
Type No. Diameter Corner R Flute Length O.A.L Shank Dia.
D1 R L1 L3 D2
LRTD0405 4.0 0.5 11 75 4
LRTD0410 4.0 1.0 11 75 4
LRTD0602 6.0 0.2 16 75 6
LRTD0603 6.0 0.3 16 75 6
LRTD0605 6.0 0.5 16 75 6
LRTD0610 6.0 1.0 16 75 6
LRTD0803 8.0 0.3 19 100 8
LRTD0805 8.0 0.5 19 100 8
LRTD0810 8.0 1.0 19 100 8
LRTD1002 10.0 0.2 25 100 10
LRTD1003 10.0 0.3 25 100 10
LRTD1005 10.0 0.5 25 100 10
LRTD1010 10.0 1.0 25 100 10
LRTD1020 10.0 2.0 25 100 10
LRTD1205 12.0 0.5 30 100 12
LRTD1210 12.0 1.0 30 100 12
LRTD1220 12.0 2.0 30 100 12
LRTD1610 16.0 1.0 45 150 16
LRTD1620 16.0 2.0 45 150 16
TOP