LFTA-4T

Standard Series

End Mills

  • MG
  • 0.6
  • 螺旋角45方 00
  • 4F 00
  • HRc55
  • 鍍層T2
ADD INQUIRY
Features:  
    1. <Extended flute> Standard 4 flutes flat endmill design. Good at milling for general steels hardness up to HRc45.
    2. The tip of the end face of end mill is designed with a true right angle, which is suitable for <90 degree clearance angle>.
Working Materials Hardness Level:   Good at steel material (HRc 18~45). E.g. S45C, P20 ,NAK80,SUS304 etc.
Applicable Milling Methods:  Finishing     Semi-finishing and Roughing 
Applicable Coolant Ways:  MQL (Mist)  Machining , Dry Machining      Emulsion Machining , Oil  Machining 
 
Type No. Diameter Flute Length O.A.L. Shank Dia.
D1 L1 L3 D2
LFTA0204 2.0 15 50 4
LFTA0304 3.0 20 50 4
LFTA0304B 3.0 15 50 6
LFTA0404 4.0 25 75 4
LFTA0404B 4.0 20 75 6
LFTA0504 5.0 30 75 6
LFTA0604 6.0 30 75 6
LFTA0804 8.0 40 100 8
LFTA1004 10.0 40 100 10
LFTA1004L 10.0 50 100 10
LFTA1204 12.0 45 100 12
LFTA1204L 12.0 50 100 12
LFTA1604 16.0 60 150 16
LFTA1604L 16.0 70 150 16
LFTA2004 20.0 60 150 20
LFTA2004L 20.0 75 150 20
TOP