UNBX-4T

Micro Diameter & Long Neck Series Endmill

Ball Nose End Mills

  • MG-super
  • 0.2
  • 30
  • 縮頸1
  • 4F-1
  • HRc65
  • 鍍層G15
ADD INQUIRY
Features:  
    1. The 4 flutes long neck of ball nose endmill design, which is suitable for 3D cutting of steel materials hardness HRc45~65.
    2. The minimum diameter is 1mm.
Working Materials Hardness Level:   Good at high-hardness steel material (HRc 45~65). E.g. SKD61(HRc52) ,S136(HRc52), SKD11(HRC62) etc.
Applicable Milling Methods:  Finishing  Semi-finishing     Roughing
Applicable Coolant Ways:  MQL (Mist)  Machining    Dry Machining    Emulsion Machining , Oil  Machining
 
Type No. Diameter Neck Dia Flute Length Effective Length O.A.L. Shank Dia.
D1 D3 L1 L2 L3 D2
UNBX100404 R0.5 0.95 1.5 4 50 4
UNBX100604 R0.5 0.95 1.5 6 50 4
UNBX100804 R0.5 0.95 1.5 8 50 4
UNBX101004 R0.5 0.95 1.5 10 50 4
UNBX101204 R0.5 0.95 1.5 12 50 4
UNBX150604 R0.75 1.45 2 6 50 4
UNBX150804 R0.75 1.45 2 8 50 4
UNBX151004 R0.75 1.45 2 10 50 4
UNBX151204 R0.75 1.45 2 12 50 4
UNBX151604 R0.75 1.45 2 16 50 4
UNBX200804 R1.0 1.92 3 8 50 4
UNBX201004 R1.0 1.92 3 10 50 4
UNBX201204 R1.0 1.92 3 12 50 4
UNBX201604 R1.0 1.92 3 16 50 4
UNBX202004 R1.0 1.92 3 20 50 4
UNBX300804 R1.5 2.9 4 8 60 6
UNBX301004 R1.5 2.9 4 10 60 6
UNBX301204 R1.5 2.9 4 12 60 6
UNBX301604 R1.5 2.9 4 16 60 6
UNBX302004 R1.5 2.9 4 20 60 6
UNBX302504 R1.5 2.9 4 25 60 6
UNBX401004 R2.0 3.88 5 10 75 6
UNBX401204 R2.0 3.88 5 12 75 6
UNBX401604 R2.0 3.88 5 16 75 6
UNBX402004 R2.0 3.88 5 20 75 6
UNBX402504 R2.0 3.88 5 25 75 6
TOP