| Features: |
|
1. "Long shank" with standard flutes design is suitable for surface, slot, side milling of steel material up to HRc55.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc22~55. E.g.P20, SUS304, NAK80, SKD61(HRc52), S136(HRc52) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing  Roughing |
| Applicable Coolant Ways: MQL (Mist) Machining Dry Machining ,Emulsion Machining ,Oil Machining |
| Type No. | Diameter | Neck Dia. | Flute Length | Effective Length | O.A.L. | Shank Dia. |
|---|---|---|---|---|---|---|
| D1 | D3 | L1 | L2 | L3 | D2 | |
| ULE0604 | 6.0 | 5.80 | 16 | 40 | 100 | 6 |
| ULE0604X | 6.0 | 5.80 | 16 | 40 | 150 | 6 |
| ULE0804 | 8.0 | 7.70 | 20 | 50 | 100 | 8 |
| ULE0804X | 8.0 | 7.70 | 20 | 50 | 150 | 8 |
| ULE1004 | 10.0 | 9.60 | 25 | 50 | 100 | 10 |
| ULE1004X | 10.0 | 9.60 | 25 | 50 | 150 | 10 |
| ULE1204 | 12.0 | 11.5 | 30 | 50 | 100 | 12 |
| ULE1204X | 12.0 | 11.5 | 30 | 50 | 150 | 12 |
| ULE1604X | 16.0 | 15.5 | 40 | 65 | 150 | 16 |
| ULE2004X | 20.0 | 19.0 | 45 | 70 | 150 | 20 |