| Features: |
|
1. Special geometry with "Long shank" design , is suitable for semi-finishing, finishing of 3D milling of high-hardness material.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc48-62. E.g. SKD61(HRc52), STAVAX(HRC52), SKD11(HRC62) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing  Roughing |
| Applicable Coolant Ways: MQL (Mist) Machining Dry Machining , Emulsion Machining ,Oil Machining |
| Type No. | Diameter | Flute Length | O.A.L | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| UHBT0302 | R1.5 | 6 | 75 | 6 |
| UHBT0402 | R2 | 8 | 75 | 6 |
| UHBT0502 | R2.5 | 10 | 75 | 6 |
| UHBT0602 | R3 | 12 | 75 | 6 |
| UHBT0802 | R4 | 16 | 75 | 8 |
| UIBT0602 | R3 | 12 | 100 | 6 |
| UIBT0802 | R4 | 16 | 100 | 8 |
| UIBT1002 | R5 | 20 | 100 | 10 |
| UIBT1202 | R6 | 24 | 100 | 12 |