KSR

航空宇宙シリーズ

End Mills

お問い合わせカートに追加
FEATURES：
1. Overcoming the challenges of machining Inconel 718 and Nickel-based superalloy, with excellent performance and tool life.
2. Special geometry design with good rigidity and better vibration resistance during processing.
3. The new composite G18 coating design with better wear-resistant.
4. Vc value can reach 50 (m/min) and above, when machining Inconel 718 and nickel-based superalloy.
Working Materials Hardness Level: Extremely difficult-to-cut materials, such as Inconel 718, nickel-based superalloys, stainless steel, and titanium alloys.  
Applicable Milling Methods: Rough milling, semi-finish milling, finish milling
Applicable Coolant Ways: Wet
★The star marks refer to be with "Weldon flat design".
 
Type No. Diameter Neck Dia Corner Flute Length Effective Length O.A.L Shank Dia Weldon
D1 D3 R L1 L2 L3 D2
KSR0302S 3 3.05 0.2 4 6 50 6  
KSR0302 3 2.85 0.2 8 12 50 6  
KSR0302E 3 2.85 0.2 6 10 57 6  
KSR0402S 4 4.05 0.2 5 9 50 6  
KSR0402 4 3.8 0.2 11 15 50 6  
KSR0402E 4 3.8 0.2 8 13 57 6  
KSR0405S 4 4.05 0.5 5 9 50 6  
KSR0405 4 3.8 0.5 11 15 50 6  
KSR0405E 4 3.8 0.5 8 13 57 6  
KSR0502S 5 5.05 0.2 7 10 50 6  
KSR0502 5 4.75 0.2 13 18 50 6  
KSR0502E 5 4.75 0.2 10 16 57 6  
KSR0602S 6 X 0.2 8 X 50 6  
KSR0602 6 5.7 0.2 16 20 50 6  
KSR0602E 6 5.7 0.2 12 18 57 6 ★
KSR0602L 6 5.7 0.2 21 26 65 6  
KSR0605S 6 X 0.5 8 X 50 6  
KSR0605 6 5.7 0.5 16 20 50 6  
KSR0605E 6 5.7 0.5 12 18 57 6 ★
KSR0605L 6 5.7 0.5 21 26 65 6  
KSR0610 6 5.7 1 16 20 50 6  
KSR0610E 6 5.7 1 12 18 57 6 ★
KSR0610L 6 5.7 1 21 26 65 6  
KSR0805S 8 X 0.5 11 X 58 8  
KSR0805 8 7.6 0.5 20 25 60 8  
KSR0805E 8 7.6 0.5 16 25 63 8 ★
KSR0805L 8 7.6 0.5 32 37 75 8  
KSR0810 8 7.6 1 20 25 60 8  
KSR0810E 8 7.6 1 16 25 63 8 ★
KSR0810L 8 7.6 1 32 37 75 8  
KSR1005S 10 X 0.5 13 X 58 10  
KSR1005 10 9.5 0.5 25 32 75 10  
KSR1005E 10 9.5 0.5 20 29 72 10 ★
KSR1005L 10 9.5 0.5 40 47 89 10  
KSR1010S 10 X 1 13 X 58 10  
KSR1010 10 9.5 1 25 32 75 10  
KSR1010E 10 9.5 1 20 29 72 10 ★
KSR1010L 10 9.5 1 40 47 89 10  
KSR1015 10 9.5 1.5 25 32 75 10  
KSR1015E 10 9.5 1.5 20 29 72 10 ★
KSR1020 10 9.5 2 25 32 75 10  
KSR1020E 10 9.5 2 20 29 72 10 ★
KSR1020L 10 9.5 2 40 47 89 10  
KSR1030 10 9.5 3 25 32 75 10  
KSR1030E 10 9.5 3 20 29 72 10 ★
KSR1030L 10 9.5 3 40 47 89 10  
KSR1205S 12 X 0.5 15 X 67 12  
KSR1205 12 11.4 0.5 30 35 75 12  
KSR1205E 12 11.4 0.5 24 35 83 12 ★
KSR1205L 12 11.4 0.5 45 53 100 12  
KSR1210S 12 X 1 15 X 67 12  
KSR1210 12 11.4 1 30 35 75 12  
KSR1210E 12 11.4 1 24 35 83 12 ★
KSR1210L 12 11.4 1 45 53 100 12  
KSR1215 12 11.4 1.5 30 35 75 12  
KSR1215E 12 11.4 1.5 24 35 83 12 ★
KSR1220 12 11.4 2 30 35 75 12  
KSR1220E 12 11.4 2 24 35 83 12 ★
KSR1220L 12 11.4 2 45 53 100 12  
KSR1230 12 11.4 3 30 35 75 12  
KSR1230E 12 11.4 3 24 35 83 12 ★
KSR1230L 12 11.4 3 45 53 100 12  
KSR1605S 16 X 0.5 19 X 73 16  
KSR1605 16 15.2 0.5 40 48 100 16  
KSR1605E 16 15.2 0.5 32 42 92 16 ★
KSR1605L 16 15.2 0.5 55 65 115 16  
KSR1610S 16 X 1 19 X 73 16  
KSR1610 16 15.2 1 40 48 100 16  
KSR1610E 16 15.2 1 32 42 92 16 ★
KSR1610L 16 15.2 1 55 65 115 16  
KSR1620 16 15.2 2 40 48 100 16  
KSR1620E 16 15.2 2 32 42 92 16 ★
KSR1620L 16 15.2 2 55 65 115 16  
KSR1630 16 15.2 3 40 48 100 16  
KSR1630E 16 15.2 3 32 42 92 16 ★
KSR1630L 16 15.2 3 55 65 115 16  

Related Products

X-KSE

X-KSE

Nickel-based superalloys Series
KSE

KSE

High-performance anti-vibration corner radius end mill
X-KSR

X-KSR

Nickel-based superalloys Series
TOP