RTG

一般鋼切削シリーズ

End mills

お問い合わせカートに追加
Features:  
    1. Standard 2 flutes corner radius endmill with low helix angle design. Good at milling for general steels hardness up to HRc45.
    2. Corner radius endmill of corner R , minimum design is 0.2mm.
Working Materials Hardness Level:   Good at steel material (HRc 18~45). E.g. S45C, P20 ,NAK80,SUS304 etc.
Applicable Milling Methods:  Finishing ,Semi-finishing and Roughing 
Applicable Coolant Ways:  Emulsion Machining , Oil  Machining       MQL (Mist)  Machining , Dry Machining
 
Type No. Diameter Corner R Flute Length O.A.L Shank Dia.
D1 R L1 L3 D2
RTG0102 1.0 0.2 3 50 4
RTG0152 1.5 0.2 4 50 4
RTG0202 2.0 0.2 6 50 4
RTG0205 2.0 0.5 6 50 4
RTG0252 2.5 0.2 8 50 4
RTG0255 2.5 0.5 8 50 4
RTG0302 3.0 0.2 8 50 4
RTG0303 3.0 0.3 8 50 4
RTG0305 3.0 0.5 8 50 4
RTG0402 4.0 0.2 11 50 4
RTG0403 4.0 0.3 11 50 4
RTG0405 4.0 0.5 11 50 4
RTG0503 5.0 0.3 13 50 6
RTG0505 5.0 0.5 13 50 6
RTG0602 6.0 0.2 16 50 6
RTG0603 6.0 0.3 16 50 6
RTG0605 6.0 0.5 16 50 6
RTG0610 6.0 1.0 16 50 6
RTG0803 8.0 0.3 20 60 8
RTG0805 8.0 0.5 20 60 8
RTG1002 10.0 0.2 25 75 10
RTG1003 10.0 0.3 25 75 10
RTG1005 10.0 0.5 25 75 10
RTG1010 10.0 1.0 25 75 10
RTG1203 12.0 0.3 30 75 12
RTG1205 12.0 0.5 30 75 12
RTG1210 12.0 1.0 30 75 12
RTG1215 12.0 1.5 30 75 12
RTG1220 12.0 2.0 30 75 12
TOP