| FEATURES： | |
|---|---|
|
1. Overcoming the challenges of machining Inconel 718 and Nickel-based superalloy, with excellent performance and tool life.
|
|
|
2. Special geometry design with good rigidity and better vibration resistance during processing.
|
|
| 3. The new composite G18 coating design with better wear-resistant. | |
| 4. Vc value can reach 50 (m/min) and above, when machining Inconel 718 and nickel-based superalloy. | |
| Working Materials Hardness Level: Extremely difficult-to-cut materials, such as Inconel 718, nickel-based superalloys, stainless steel, and titanium alloys. | |
Applicable Milling Methods:  Rough milling, semi-finish milling, finish milling |
|
| Applicable Coolant Ways: Wet |
| Type No. | Diameter | Flute Length | Chamfer | Neck Dia | O.A.L | Thread Size | Spanner Type No. |
|---|---|---|---|---|---|---|---|
| D1 | L1 | C | D2 | L2 | M | ||
| X-KSE0804 | 8 | 8 | 0.1 | 7.8 | 12.1 | M5-3P | K08 |
| X-KSE1004 | 10 | 10 | 0.125 | 9.8 | 16.1 | M7-3P | K10 |
| X-KSE1204 | 12 | 12 | 0.15 | 11.7 | 20.3 | M8-3P | K12 |
| X-KSE1604 | 16 | 16 | 0.2 | 15.6 | 25.7 | M10-3P | K16 |
| X-KSE2004 | 20 | 20 | 0.25 | 19.5 | 31.1 | M12-3P | K20 |
| X-KSE2504 | 25 | 25 | 0.3 | 24.4 | 39.3 | M16-3P | K25 |
