| FEATURES： | |
|---|---|
|
1. Overcoming the challenges of machining Inconel 718 and Nickel-based superalloy, with excellent performance and tool life.
|
|
|
2. Special geometry design with good rigidity and better vibration resistance during processing.
|
|
|
3. The new composite G18 coating design with better wear-resistant.
|
|
|
4. Vc value can reach 50 (m/min) and above, when machining Inconel 718 and nickel-based superalloy.
|
|
| Working Materials Hardness Level: Extremely difficult-to-cut materials, such as Inconel 718, nickel-based superalloys, stainless steel, and titanium alloys. | |
Applicable Milling Methods:  Rough milling, semi-finish milling, finish milling |
|
| Applicable Coolant Ways: Wet |
| Type No. | Diameter | Flute Length | Corner R | Neck Dia | O.A.L | Thread Size | Spanner Type No. |
|---|---|---|---|---|---|---|---|
| D1 | L1 | R | D2 | L2 | M | ||
| X-KSR0805 | 8 | 8 | 0.5 | 7.8 | 12.1 | M5-3P | K08 |
| X-KSR0810 | 8 | 8 | 1 | 7.8 | 12.1 | M5-3P | K08 |
| X-KSR1005 | 10 | 10 | 0.5 | 9.8 | 16.1 | M7-3P | K10 |
| X-KSR1010 | 10 | 10 | 1 | 9.8 | 16.1 | M7-3P | K10 |
| X-KSR1015 | 10 | 10 | 1.5 | 9.8 | 16.1 | M7-3P | K10 |
| X-KSR1020 | 10 | 10 | 2 | 9.8 | 16.1 | M7-3P | K10 |
| X-KSR1030 | 10 | 10 | 3 | 9.8 | 16.1 | M7-3P | K10 |
| X-KSR1205 | 12 | 12 | 0.5 | 11.7 | 20.3 | M8-3P | K12 |
| X-KSR1210 | 12 | 12 | 1 | 11.7 | 20.3 | M8-3P | K12 |
| X-KSR1220 | 12 | 12 | 2 | 11.7 | 20.3 | M8-3P | K12 |
| X-KSR1230 | 12 | 12 | 3 | 11.7 | 20.3 | M8-3P | K12 |
| X-KSR1605 | 16 | 16 | 0.5 | 15.6 | 25.7 | M10-3P | K16 |
| X-KSR1610 | 16 | 16 | 1 | 15.6 | 25.7 | M10-3P | K16 |
| X-KSR1620 | 16 | 16 | 2 | 15.6 | 25.7 | M10-3P | K16 |
| X-KSR1630 | 16 | 16 | 3 | 15.6 | 25.7 | M10-3P | K16 |
| X-KSR1640 | 16 | 16 | 4 | 15.6 | 25.7 | M10-3P | K16 |
| X-KSR2005 | 20 | 20 | 0.5 | 19.5 | 31.1 | M12-3P | K20 |
| X-KSR2010 | 20 | 20 | 1 | 19.5 | 31.1 | M12-3P | K20 |
| X-KSR2020 | 20 | 20 | 2 | 19.5 | 31.1 | M12-3P | K20 |
| X-KSR2030 | 20 | 20 | 3 | 19.5 | 31.1 | M12-3P | K20 |
| X-KSR2040 | 20 | 20 | 4 | 19.5 | 31.1 | M12-3P | K20 |
