UNER

超硬小径エンドミル＆超硬ロングネックエンドミル

End Mills

お問い合わせカートに追加
Features:  
    1. The 2 flutes long neck of flat endmill design, which is suitable for steel materials hardness HRc45~65.
    2. The minimum diameter is 1mm.
Working Materials Hardness Level:   Good at high-hardness steel material (HRc 45~65). E.g. SKD61(HRc52) ,S136(HRc52), SKD11(HRC62) etc.
Applicable Milling Methods:  Finishing   Semi-finishing  Roughing
Applicable Coolant Ways:  MQL (Mist)  Machining     Dry Machining      Emulsion Machining , Oil  Machining
 
Type No. Diameter Neck Dia Corner R Flute Length Effective Length O.A.L. Shank Dia.
D1 D3 R L1 L2 L3 D2
UNER1006 1.0 0.95 0.2 1.5 6 50 4
UNER1008 1.0 0.95 0.2 1.5 8 50 4
UNER1010 1.0 0.95 0.2 1.5 10 50 4
UNER1012 1.0 0.95 0.2 1.5 12 50 4
UNER1508 1.5 1.44 0.2 2 8 50 4
UNER1510 1.5 1.44 0.2 2 10 50 4
UNER1512 1.5 1.44 0.2 2 12 50 4
UNER1516 1.5 1.44 0.2 2 16 50 4
UNER2008 2.0 1.92 0.2 3 8 50 4
UNER2010 2.0 1.92 0.2 3 10 50 4
UNER2012 2.0 1.92 0.2 3 12 50 4
UNER2016 2.0 1.92 0.2 3 16 50 4
UNER2020 2.0 1.92 0.2 3 20 50 4
UNER2510 2.5 2.40 0.2 3 10 50 4
UNER2512 2.5 2.40 0.2 3 12 50 4
UNER2516 2.5 2.40 0.2 3 16 50 4
UNER2520 2.5 2.40 0.2 3 20 50 4
UNER3010 3.0 2.90 0.2 4 10 50 6
UNER3012 3.0 2.90 0.2 4 12 50 6
UNER3016 3.0 2.90 0.2 4 16 50 6
UNER3020 3.0 2.90 0.2 4 20 60 6
UNER3025 3.0 2.90 0.2 4 25 60 6
TOP