LNE

超硬小径エンドミル＆超硬ロングネックエンドミル

End Mills

  • MG
  • 螺旋角35方
  • 縮頸2
  • 2F
  • HRc60
  • G12
お問い合わせカートに追加
Features:  
    1. The 2 flutes long neck of ball nose endmill design, which is suitable for 3D cutting of steel materials hardness up to HRc48.
    2. The minimum diameter is 0.5mm.
Working Materials Hardness Level:   Good at steel material (HRc 22~48). E.g. SUS304,S45C,P20,NAK80 etc.
Applicable Milling Methods:  Finishing   Semi-finishing
Applicable Coolant Ways:  Emulsion Machining , Oil  Machining      MQL (Mist)  Machining    Dry Machining 
 
Type No. Diameter Neck Dia Flute Length Effective Length O.A.L. Shank Dia.
D1 D3 L1 L2 L3 D2
LNE0502 0.5 0.46 0.8 2 50 4
LNE0504 0.5 0.46 0.8 4 50 4
LNE0506 0.5 0.46 0.8 6 50 4
LNE1006 1.0 0.95 1.5 6 50 4
LNE1008 1.0 0.95 1.5 8 50 4
LNE1010 1.0 0.95 1.5 10 50 4
LNE1012 1.0 0.95 1.5 12 50 4
LNE1508 1.5 1.45 2 8 50 4
LNE1510 1.5 1.45 2 10 50 4
LNE1512 1.5 1.45 2 12 50 4
LNE1516 1.5 1.45 2 16 50 4
LNE2008 2.0 1.92 3 8 50 4
LNE2010 2.0 1.92 3 10 50 4
LNE2012 2.0 1.92 3 12 50 4
LNE2016 2.0 1.92 3 16 50 4
LNE2020 2.0 1.92 3 20 50 4
LNE2510 2.5 2.42 3 10 50 4
LNE2512 2.5 2.42 3 12 50 4
LNE2516 2.5 2.42 3 16 50 4
LNE2520 2.5 2.42 3 20 50 4
LNE3010 3.0 2.90 4 10 50 6
LNE3012 3.0 2.90 4 12 50 6
LNE3016 3.0 2.90 4 16 50 6
LNE3020 3.0 2.90 4 20 60 6
LNE3025 3.0 2.90 4 25 60 6
TOP