| Features: |
|
1. Special Diamond "CVD coating" is extremely wear-resistant and has a long tool life.
|
|
2. 4 flutes of ball nose endmill design is specially used for 3D milling of graphite and composite materials.
|
| Working Materials Hardness Level: Good at graphite and composite materials. E.g. Graphite,CFRP,GFRP etc. |
Applicable Milling Methods:  Finishing ,Semi-finishing and Roughing |
| Applicable Coolant Ways: Dry Machining |
| Type No. | Diameter | Flute Length | O.A.L. | Shank Dia. |
|---|---|---|---|---|
| D1 | L1 | L3 | D2 | |
| GB0304 | R1.5 | 12 | 50 | 3 |
| GB0404 | R2.0 | 15 | 50 | 4 |
| GB0604 | R3.0 | 20 | 60 | 6 |
| GB0804 | R4.0 | 22 | 60 | 8 |
| GB1004 | R5.0 | 25 | 75 | 10 |
| GB0304M | R1.5 | 12 | 75 | 3 |
| GB0404M | R2.0 | 15 | 75 | 4 |
| GB0604M | R3.0 | 30 | 80 | 6 |
| GB0604L | R3.0 | 30 | 100 | 6 |
| GB0804M | R4.0 | 32 | 100 | 8 |
| GB1004M | R5.0 | 40 | 100 | 10 |