| Features: |
|
1. "Long shank with standard flutes" design is suitable for surface, slot, side and 3D milling of steel material up to HRc52.
|
| Working Materials Hardness Level: Good at steels with hardness up to HRc32~52. E.g. P20, NAK80, SKD61(HRc52), S136(HRc52) etc. |
Applicable Milling Methods:  Finishing  Semi-finishing  Roughing |
| Applicable Coolant Ways: MQL (Mist) Machining Dry Machining ,Emulsion Machining ,Oil Machining |
| Type No. | Diameter | Corner R | Flute Length | O.A.L | Shank Dia. |
|---|---|---|---|---|---|
| D1 | R | L1 | L3 | D2 | |
| ULR0605 | 6.0 | 0.5 | 16 | 75 | 6 |
| ULR0610 | 6.0 | 1.0 | 16 | 75 | 6 |
| ULR0805 | 8.0 | 0.5 | 20 | 100 | 8 |
| ULR0810 | 8.0 | 1.0 | 20 | 100 | 8 |
| ULR1005 | 10.0 | 0.5 | 25 | 100 | 10 |
| ULR1010 | 10.0 | 1.0 | 25 | 100 | 10 |
| ULR1020 | 10.0 | 2.0 | 25 | 100 | 10 |
| ULR1205 | 12.0 | 0.5 | 30 | 100 | 12 |
| ULR1210 | 12.0 | 1.0 | 30 | 100 | 12 |
| ULR1220 | 12.0 | 2.0 | 30 | 100 | 12 |
| ULR1610 | 16.0 | 1.0 | 45 | 150 | 16 |
| ULR1620 | 16.0 | 2.0 | 45 | 150 | 16 |