| Features: |
|
1. Special Diamond "CVD coating" is extremely wear-resistant and has a long tool life.
|
|
2. The"micro diameter & long neck" ball nose endmill design is specially used for milling of graphite and composite materials.
|
|
3. The minimum diameter is 0.5mm.
|
| Working Materials Hardness Level: Good at graphite and composite materials. E.g. Graphite,CFRP,GFRP etc. |
Applicable Milling Methods:  Finishing ,Semi-finishing |
| Applicable Coolant Ways: Dry Machining |
| Type No. | Diameter | Neck Dia. | Flute Length | Effective Length | O.A.L. | Shank Dia. |
|---|---|---|---|---|---|---|
| D1 | D3 | L1 | L2 | L3 | D2 | |
| GNE0504 | 0.5 | 0.46 | 1.5 | 4 | 50 | 4 |
| GNE0506 | 0.5 | 0.46 | 1.5 | 6 | 50 | 4 |
| GNE0604 | 0.6 | 0.55 | 2.0 | 4 | 50 | 4 |
| GNE0606 | 0.6 | 0.55 | 2.0 | 6 | 50 | 4 |
| GNE0806 | 0.8 | 0.75 | 2.0 | 6 | 50 | 4 |
| GNE0808 | 0.8 | 0.75 | 2.0 | 8 | 50 | 4 |
| GNE1006 | 1.0 | 0.95 | 2.5 | 6 | 50 | 4 |
| GNE1010 | 1.0 | 0.95 | 2.5 | 10 | 50 | 4 |
| GNE1016 | 1.0 | 0.95 | 2.5 | 16 | 50 | 4 |
| GNE1508 | 1.5 | 1.44 | 3.0 | 8 | 50 | 4 |
| GNE1512 | 1.5 | 1.44 | 3.0 | 12 | 50 | 4 |
| GNE1516 | 1.5 | 1.44 | 3.0 | 16 | 50 | 4 |
| GNE2010 | 2.0 | 1.92 | 3.0 | 10 | 50 | 4 |
| GNE2016 | 2.0 | 1.92 | 3.0 | 16 | 50 | 4 |
| GNE3015 | 3.0 | 2.90 | 4.5 | 15 | 50 | 6 |
| GNE3030 | 3.0 | 2.90 | 4.5 | 30 | 75 | 6 |
| GNE4035 | 4.0 | 3.90 | 6.0 | 35 | 75 | 6 |
| GNE6050 | 6.0 | 5.80 | 9.0 | 50 | 100 | 6 |