| Features: |
|
K Spanner is used for assembling the exchangeable head mill and the shank.
|
| Directions: |
|
1. Please reference the Nm value on "K Spanner" when assembling the exchangeable head mill and shank.
|
|
2. The head mill and the shank are both made of solid carbide. If K Spanner is unavailable when assembling, please fix both sides manually and slightly. The part will be strengthened when milling.
|
|
3. Reminder: Customer may break the thread of the head mill because of exerting himself too much when assembling.
|
| Type No. | Diameter | End Mills (Use End) |
Ball Nose End Mills (Usd End) |
Thread Milling | N.m |
|---|---|---|---|---|---|
| D1 | |||||
| K08 | 8.0 | XT-08 | XTs-08 | -- | 6 |
| K10 | 10.0 | XT-10 | XTs-10 | -- | 7 |
| K12 | 12.0 | XT-12 | XTs-12 | -- | 9 |
| K16 | 16.0 | XT-16 | XTs-16 | X-TW | 10 |
| K20 | 20.0 | XT-20 | XTs-20 | X-TW | 12 |
| K25 | 25.0 | XT-25 | XTs-25 | X-TW | 15 |
| K32 | 32.0 | XT-32 | XTs-32 | X-TW | 20 |
Note: When combining shank and head, please refer to the "N.m" value.