Features: |
1. Special "High Helix Angle" corner radius endmill geometry design brings low loading and good life time when machining.
|
2. 1D high efficiency slot milling and side milling and shows outstanding chips removal ability and efficiency.
|
Working Materials Hardness Level: Good at difficult-to-cut material : Titanium alloy - Ti-6A1-4V |
Applicable Milling Methods: Roughing ,Semi-finishing and Finishing |
Applicable Coolant Ways: Emulsion Machining Oil Machining MQL (Mist) Machining |
Type No. | Diameter | Corner R | Flute Length | O.A.L | Shank Dia. |
---|---|---|---|---|---|
D1 | R | L1 | L3 | D2 | |
UTHR0305 | 3.0 | 0.5 | 8 | 50 | 6 |
UTHR0405 | 4.0 | 0.5 | 10 | 50 | 6 |
UTHR0505 | 5.0 | 0.5 | 13 | 50 | 6 |
UTHR0605 | 6.0 | 0.5 | 16 | 50 | 6 |
UTHR0610 | 6.0 | 1.0 | 16 | 50 | 6 |
UTHR0805 | 8.0 | 0.5 | 20 | 60 | 8 |
UTHR0810 | 8.0 | 1.0 | 20 | 60 | 8 |
UTHR1005 | 10.0 | 0.5 | 25 | 75 | 10 |
UTHR1010 | 10.0 | 1.0 | 25 | 75 | 10 |
UTHR1020 | 10.0 | 2.0 | 25 | 75 | 10 |
UTHR1030 | 10.0 | 3.0 | 25 | 75 | 10 |
UTHR1210 | 12.0 | 1.0 | 30 | 75 | 12 |
UTHR1220 | 12.0 | 2.0 | 30 | 75 | 12 |
UTHR1230 | 12.0 | 3.0 | 30 | 75 | 12 |
UTHR1610 | 16.0 | 1.0 | 40 | 100 | 16 |
UTHR1620 | 16.0 | 2.0 | 40 | 100 | 16 |
UTHR1630 | 16.0 | 3.0 | 40 | 100 | 16 |
UTHR2010 | 20.0 | 1.0 | 45 | 100 | 20 |
UTHR2020 | 20.0 | 2.0 | 45 | 100 | 20 |
UTHR2030 | 20.0 | 3.0 | 45 | 100 | 20 |